Autonics BS5-T2M - Фото сензор DC5-24V

Data sheet

Sensing typeThrough-beam type

Sensing distance5mm

Sensing targetOpaque

Min. sensing target≥Ø0.8mm×2mm

Hysteresis(distance)≤0.05mm

Response timeLight ON: Max. 20㎲, Dark ON: Max. 100㎲

Response frequency2kHz

Light sourceInfrared LED(940nm)

Operation modeLight ON/Dark ON(set by control wire)

IndicatorOperation indicator (red LED)

Weight_BodyApprox. 30g

Power supply5-24VDC @(=) ±10%(ripple P-P : max. 10%)

Load voltage≤30VDC@(=)

Load currentMax. 100mA

Residual voltageNPN: ≤1.2VDC@(=), PNP: ≤ 1.2VDC@(=)

Current consumptionMax. 30mA

Control outputNPN open collector output

Protection circuitReverse polarity protection circuit, output overcurrent (short-circuit) protection circuit

Insulation resistance≥20 MΩ (250 VDC@(=) megger)

Noise immunityThe square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC@(=)

Dielectric strengthBetween the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute

Vibration1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours

Shock15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times

Environment_Ambient illuminationFluorescent lamp: Max. 1,000lx(received illumination)

Environment_Ambient temperature-20 to 55℃, storage : -25 to 85℃

Environment_Ambient humidity35 to 85% RH, storage: 35 to 85% RH

Protection structureIP50 (IEC standard)

ConnectionConnector type

MaterialCase: PBT, Sensing part: PC